Brocade Communications Systems 8 Reference page 506

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured

with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is

for information purposes only, and no action is required.

IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools

Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode check box. The switch

must be disabled to change the IDID mode.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents