Brocade Communications Systems 8 Reference page 745

ZONE-1049
Message
<timestamp>, [ZONE-1049], <sequence-number>,, ERROR, <system-name>, ZONE
AD-DefZone conflict detected while system initialization.
Probable Cause Indicates that there is an AD-DefZone conflict.
Recommended Check and resolve the default zone mismatch issue.
Action
Severity ERROR
ZONE-1050
Message
<timestamp>, [ZONE-1050], <sequence-number>,, INFO, <system-name>, The Interop
Safe Zoning mode is set to Enabled.
Probable Cause Indicates that the Interop Safe Zoning mode is enabled.
Recommended Verify if the Safe Zoning mode change was done on purpose.
Action
Severity INFO
ZONE-1051
Message
<timestamp>, [ZONE-1051], <sequence-number>,, INFO, <system-name>, The Interop
Safe Zoning mode is set to Disabled.
Probable Cause Indicates that the Interop Safe Zoning mode is disabled.
Recommended Verify if the Safe Zoning mode change was done on purpose.
Action
Severity INFO
ZONE-1052
Message
<timestamp>, [ZONE-1052], <sequence-number>,, INFO, <system-name>, The Interop
Default Zone state is set to enabled.
Probable Cause Indicates the Interop Default Zone attribute state is enabled.
Recommended Verify if the Interop Default Zone attribute state change was done on purpose.
Action
Severity INFO
Fabric OS Message Reference
53-1001767-01
111
ZONE-1049
669