Brocade Communications Systems 8 Reference page 379

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

<timestamp>, [FW-1136], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause

Indicates that the number of fabric logins has changed from a value outside of the acceptable

range to a value within the acceptable range. Fabric logins occur when a port or device initializes

with the fabric. The event is called a fabric login or FLOGI.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1137], <sequence-number>,, INFO, <system-name>, <Label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause

Indicates that the number of small form-factor pluggable (SFP) state changes has changed. SFP

state changes occur when the SFP is inserted or removed.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1138], <sequence-number>,, INFO, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the number of small form-factor pluggable (SFP) state changes has fallen below the

low boundary. SFP state changes occur when the SFP is inserted or removed. A low number of SFP

state changes means that the switch is functioning normally.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1139], <sequence-number>,, INFO, <system-name>, <Label>, is

above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents