Cee Config System Messages - Brocade Communications Systems 8 Reference

CEE CONFIG System Messages

CCFG-1001
Message
<timestamp>, [CCFG-1001], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module>, rc = <error>.
Probable Cause Indicates that initialization of a module within the Converged Enhanced Ethernet (CEE)
configuration management daemon has failed.
Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Action Command Reference Manual for more information on this command.
Severity ERROR
CCFG-1002
Message
<timestamp>, [CCFG-1002], <sequence-number>,, INFO, <system-name>, Started
loading CEE system configuration.
Probable Cause Indicates that the Converged Enhanced Ethernet (CEE) system configuration has started loading.
Recommended No action is required.
Action
Severity INFO
CCFG-1003
Message
<timestamp>, [CCFG-1003], <sequence-number>,, INFO, <system-name>, System is
ready to accept CEE user commands.
Probable Cause Indicates that the Converged Enhanced Ethernet (CEE) shell is ready to accept configuration
commands from the user.
Recommended No action is required.
Action
Severity INFO
CCFG-1004
Message
<timestamp>, [CCFG-1004], <sequence-number>,, ERROR, <system-name>, Configuration
replay failed due to missing system startup configuration.
Fabric OS Message Reference
53-1001767-01
Chapter
13
89