Viewing And Configuring System Message Logs - Brocade Communications Systems 8 Reference

1

Viewing and Configuring System Message Logs

Refer to the Fabric OS Administrator's Guide for information on interpreting results of the
portLogDump command.
Port log functionality is completely separate from the system message log. Port logs are typically
used to troubleshoot device connections.
Viewing and Configuring System Message Logs
This section provides information on viewing and configuring system message logs, including.
•
•
•
•
•
The procedures are valid for the Brocade DCX, 200E, 3016, 3250, 3850, 3900, 4012, 4016,
4018, 4020, 4024, 4100, 4900, 5000, 7500, AP 76000, 24000, and 48000.
Table 2 describes commands that you can use to view or configure the system message logs. Most
commands require admin access level. For detailed information on required access levels and
commands, refer to the Fabric OS Command Reference.
4
Viewing System Messages from Web Tools
Dumping System Messages
Viewing System Messages One Message at a Time
Clearing the System Message Log
Configuring Event Auditing
Fabric OS Message Reference
53-1001767-01