Brocade Communications Systems 8 Reference page 375

Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
FW-1124
Message
<timestamp>, [FW-1124], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of domain ID changes has changed from a value outside of the
acceptable range to a value within the acceptable range. Domain ID changes occur when there is a
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to
the switch.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
FW-1125
Message
<timestamp>, [FW-1125], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of segmentations has changed. Segmentation changes might occur due
to:
•
•
•
•
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
FW-1126
Message
<timestamp>, [FW-1126], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation
changes might occur due to:
•
Fabric OS Message Reference
53-1001767-01
Zone conflicts.
Domain conflicts.
Segmentation of the principal link between two switches.
Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Zone conflicts.
42
FW-1124
299