Brocade Communications Systems 8 Reference page 417

Recommended Run the switchStatusShow command to determine the policy violation.
Action
Severity WARNING
FW-1425
Message
<timestamp>, [FW-1425], <sequence-number>,, INFO, <system-name>, Switch status
changed from
Probable Cause Indicates that the switch status has changed to a healthy state. This occurred because a policy is
no longer violated.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
FW-1426
Message
<timestamp>, [FW-1426], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Power supply: <Number Bad> bad, <Number Missing>
absent.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty or missing power supplies is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended Replace the faulty or missing power supply.
Action
Severity WARNING
FW-1427
Message
<timestamp>, [FW-1427], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Power supply:
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty power supplies is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended Replace the faulty power supply.
Action
Severity WARNING
Fabric OS Message Reference
53-1001767-01
<Bad state>
to HEALTHY.
<Number Bad>
bad.
42
FW-1425
341