Brocade Communications Systems 8 Reference page 603

Fabric os message reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

SEC-1107
Message
<timestamp>, [SEC-1107], <sequence-number>,, INFO, <system-name>, Stamp is 0.
Probable Cause
Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity
INFO
SEC-1108
Message
<timestamp>, [SEC-1108], <sequence-number>,, ERROR, <system-name>, Fail to reset
stamp on all switches.
Probable Cause
Indicates that a version reset operation failed either because the switch could not get all the
required resources to perform the operation or because it failed to send the message to all
switches in the fabric.
Recommended
Verify that the security event was planned. If the security event was planned, run the
Action
secFabricShow command to verify that all switches in the fabric are in the ready state. When all
switches are in the ready state, retry the operation.
Severity
ERROR
SEC-1110
Message
<timestamp>, [SEC-1110], <sequence-number>,, ERROR, <system-name>, FCS list must
be the first entry in the [Defined Security policies] section. Fail to download
defined database.
Probable Cause
Indicates that a security policy download is attempted with a defined policy that does not have the
fabric configuration server (FCS) policy as the first policy. The FCS policy is required to be the first
policy in the defined security database.
Recommended
Download a correct configuration with the fabric configuration server (FCS) policy as the first policy
Action
in the defined security database.
Severity
ERROR
SEC-1111
Message
<timestamp>, [SEC-1111], <sequence-number>,, ERROR, <system-name>, New defined
FCS list must have at least one member in common with current active FCS list.
Fail to download defined database.
Fabric OS Message Reference
53-1001767-01
90
SEC-1107
527

Advertisement

Table of Contents
loading

Table of Contents