Brocade Communications Systems 8 Reference page 626

90
SEC-1306
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended Run the secFabricShow command to verify the fabric is still consistent. All the switches should be
Action in the ready state. If a switch is in the error state, the database might not be correctly updated for
that specific switch.
Severity INFO
SEC-1306
Message
<timestamp>, [SEC-1306], <sequence-number>,, INFO, <system-name>, Failed to
verify certificate with root CA.
Probable Cause Indicates the certificate could not be verified with root certificate authority (CA). This could happen
if an unauthorized switch tries to access the fabric that is not certified by a trusted root CA or a root
CA certificate does not exist on the switch.
Recommended Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
Action switch. If a failure to validate PKI objects occurs, follow the steps for re-creating PKI objects
outlined in the Secure Fabric OS Administrator's Guide. If PKI objects are valid, verify that an
unauthorized switch is not trying to access the fabric.
Severity INFO
SEC-1307
Message
<timestamp>, [SEC-1307], <sequence-number>,, INFO, <system-name>,
from <Radius/LDAP server identity> server <Radius/LDAP server identity>.
Probable Cause Indicates that after some servers timed out, the specified remote authentication dial-in user
service (RADIUS/LDAP) server responded to a switch request.
Recommended If the message appears frequently, move the responding server to the top of the RADIUS/LDAP
Action server configuration list using the aaaConfig command.
Severity INFO
SEC-1308
Message
<timestamp>, [SEC-1308], <sequence-number>,, INFO, <system-name>, All %s servers
have failed to respond.
Probable Cause Indicates that all servers in the remote authentication dial-in user service (RADIUS) configuration
have failed to respond to a switch request within the specified time-out.
Recommended Verify the switch has proper network connectivity to the specified remote authentication dial-in user
Action service (RADIUS) servers, and the servers are correctly configured.
550
Got response
Fabric OS Message Reference
53-1001767-01