Fabs System Messages - Brocade Communications Systems 8 Reference

FABS System Messages

FABS-1001
Message
<timestamp>, [FABS-1001], <sequence-number>, FFDC, CRITICAL, <system-name>,
<Function name> <Description of memory need>
Probable Cause Indicates that the system is low on memory and cannot allocate more memory for new operations.
This is usually an internal Fabric OS problem or file corruption. Description of memory need
indicates how much memory was being requested. The value could be any whole number.
Recommended Reboot or power cycle the switch.
Action
Severity CRITICAL
FABS-1002
Message
<timestamp>, [FABS-1002], <sequence-number>,, WARNING, <system-name>, <Function
name> <Description of problem>
Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal
Fabric OS problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
If the message persists, run the firmwareDownload command to update the firmware.
Severity WARNING
FABS-1004
Message
<timestamp>, [FABS-1004], <sequence-number>,, WARNING, <system-name>, <Function
name and description of problem> process <Process ID number> (<Current command
name>) <Pending signal number>
Probable Cause Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS
problem or file corruption.
Recommended Reboot or power cycle the switch.
Action
Severity WARNING
Fabric OS Message Reference
53-1001767-01
Chapter
27
189