Brocade Communications Systems 8 Reference page 365

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

Set the high boundary above the normal operation range.

<timestamp>, [FW-1012], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause

Indicates that the power supply counter changed from a value outside of the acceptable range to a

value within the acceptable range.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1033], <sequence-number>,, INFO, <system-name>, <Label>, value

has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.

Probable Cause

Indicates that the temperature of the small form-factor pluggable (SFP) has changed. Frequent

fluctuations in SFP temperature might indicate a deteriorating SFP.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1034], <sequence-number>,, WARNING, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the temperature of the small form-factor pluggable (SFP) has fallen below the low

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents