Brocade Communications Systems 8 Reference page 160

11
C2-1006
C2-1006
Message
Message <timestamp>, [C2-1006], <sequence-number>,, WARNING, <system-name>, <slot
number>,<chip index>: Internal link errors reported, no hardware faults
identified, continuing monitoring: fault1:<fault1_cnt>, fault2:<fault2_cnt>
thresh1:0x<threshold_used>.
Probable Cause Indicates a warning that some internal link errors have been detected. These can be normal in an
active running system.
The system will now automatically start a more detailed monitoring of internal hardware reported
errors. There is no action required by the user at this time. If any actual hardware failures are
detected, a C2-1010 log will be generated identifying the failing FRU.
Recommended No action is required.
Action
Severity WARNING
C2-1007
Message
Message <timestamp>, [C2-1007], <sequence-number>,, WARNING, <system-name>, S
<slot number>, P <port number>(<blade port number>): best effort QOS will be
turned off at next port state change as it is not supported under this
configuration.
Probable Cause Indicates QoS will be turned off automatically at the next port state change since best effort is no
longer supported on a 4G platform or 8G platform long distance port.
Recommended No action is required.
Action
Severity WARNING
C2-1008
Message
Message <timestamp>, [C2-1008], <sequence-number>,, WARNING, <system-name>, <slot
number>, <port number><blade port number>: QOS overwrites portcfglongdistance
vc_translation_link_init.
Probable Cause Indicates QoS overwrites the portcfglongdistance vc_translation_link_init 0 choice. ARB will be
used on the link.
Recommended No action is required.
Action
Severity WARNING
84
ARB will be used on the link.
Fabric OS Message Reference
53-1001767-01