Brocade Communications Systems 8 Reference page 227

EM-1006
Message
<timestamp>, [EM-1006], <sequence-number>, FFDC, CRITICAL, <system-name>,
Id>
Probable Cause Indicates that the sensors show the voltage is below minimum limits. The switch or specified blade
is being shut down for environmental reasons; the voltage is too low.
Recommended If this problem occurs on a blade, it usually indicates a hardware problem on the blade; replace the
Action blade.
If this problem occurs on a switch, it usually indicates a hardware problem on the main board;
replace the switch.
Severity CRITICAL
EM-1007
Message
<timestamp>, [EM-1007], <sequence-number>, FFDC, CRITICAL, <system-name>,
Id>
Probable Cause Indicates that the voltage on a switch has exceeded environmental limits. A reset is sent to the
faulty slot or the switch for nonbladed switches.
Recommended There is most likely a voltage hardware problem on the blade or motherboard of the switch.
Action
For the Brocade DCX, 24000 and 48000, replace the blade field-replaceable unit (FRU).
For the Brocade 3900 replace the motherboard FRU.
For the Brocade 200E, 3016, 3250, 3850, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000,
7500, AP7600, replace the switch.
Severity CRITICAL
EM-1008
Message
<timestamp>, [EM-1008], <sequence-number>, FFDC, CRITICAL, <system-name>, Unit in
<Slot number or Switch> with ID <FRU Id> is faulted, it is incompatible with the
<type of incompatibility> configuration.
Probable Cause Indicates that a blade inserted in the specified slot or the switch (for nonbladed switches) is not
compatible with either the platform configuration or the logical switch configuration. The blade is
faulted.
Recommended If the blade is not compatible, replace the blade and ensure the replacement blade is compatible
Action with your control processor (CP) type. If the incompatibility is with the logical switch configuration,
change the configuration with the lscfg command to be consistent with the blade type or remove
the blade.
Severity CRITICAL
Fabric OS Message Reference
53-1001767-01
has faulted. Sensors below minimum limits.
is being reset. Sensors has exceeded max limits.
22
EM-1006
<FRU
<FRU
151