Fcip System Messages - Brocade Communications Systems 8 Reference

FCIP System Messages

FCIP-1000
Message
<timestamp>, [FCIP-1000], <sequence-number>, FFDC, ERROR, <system-name>, <command
name> of GE <port number> failed. Please retry the command. Data: inst=<ASIC
instance> st=<ASIC initializing state> rsn=<reason code> fn=<message function>
oid=<ASIC ID>
Probable Cause Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended Retry the command.
Action
Severity ERROR
FCIP-1001
Message
<timestamp>, [FCIP-1001], <sequence-number>, FFDC, CRITICAL, <system-name>, FIPS
<FIPS Test Name> failed; algo=<algorithm code> type=<algorithm type> slot=<Slot
Number>.
Probable Cause Indicates that an FIPS failure has occured and requires faulting the blade or switch.
Recommended Retry the command.
Action
Severity CRITICAL
FCIP-1002
Message
<timestamp>, [FCIP-1002], <sequence-number>, INFO, CFG, <system-name>, An
IPsec/IKE policy was added.
Probable Cause Indicates that an IPsec/IKE policy was added and the config file was updated.
Recommended No action is required.
Action
Severity INFO
FCIP-1003
Message
<timestamp>, [FCIP-1003], <sequence-number>, INFO, CFG, <system-name>, An
IPsec/IKE policy was deleted.
Fabric OS Message Reference
53-1001767-01
Chapter
30
199