Brocade Communications Systems 8 Reference page 302

34
FCR-1042
Severity INFO
FCR-1042
Message
<timestamp>, [FCR-1042], <sequence-number>,, INFO, <system-name>, LSAN zone
removed in the backbone fabric.
Probable Cause Indicates that a logical storage area network (LSAN) zone within the backbone fabric was removed.
Recommended No action is required.
Action
Severity INFO
FCR-1043
Message
<timestamp>, [FCR-1043], <sequence-number>,, INFO, <system-name>, Proxy device
created in the backbone fabric.
Probable Cause Indicates that a proxy device was created in the backbone fabric.
Recommended No action is required.
Action
Severity INFO
FCR-1048
Message
<timestamp>, [FCR-1048], <sequence-number>,, ERROR, <system-name>, On EX port
(<port number>) setting port <credit type> credits failed.
Probable Cause Indicates that the specified credit type was not set.
Recommended Setting port credits failed. Execute the portEnable command.
Action
If the problem persists try restarting the switch.
If the message persists, collect switch information using the supportShow command, and contact
your switch service provider.
Severity ERROR
FCR-1049
Message
<timestamp>, [FCR-1049], <sequence-number>,, ERROR, <system-name>, EX port (
number>
Probable Cause Indicates an incoming exchange link protocol (ELP) command was issued and it is not supported.
226
) received an ELP command that is not supported.
<port
Fabric OS Message Reference
53-1001767-01