Brocade Communications Systems 8 Reference page 488

57
KAC-1008
Probable Cause Indicates that the key archival client is unable to put to the primary or backup key vault.
Recommended Determine whether the configured key value is operational, and if it is not, change the switch key
Action vault settings or resolve the operational problem at the vault.
Severity ERROR
KAC-1008
Message
<timestamp>, [KAC-1008], <sequence-number>,, ERROR, <system-name>, Putting TEP
failed check if there is already an unapproved TEP then delete it, RC=<Error code
from lkm>.
Probable Cause Indicates that there was already a pending unapproved TEP at the LKM.
Recommended Log in to the LKM and delete the unapproved TEP.
Action
Severity ERROR
KAC-1009
Message
<timestamp>, [KAC-1009], <sequence-number>,, ERROR, <system-name>,
Primary(<Primary Keyvault IP Address>) and secondary(<Secondary Keyvault IP
Address>) keyvaults are not in sync. Detected key mismatch with KeyID = <KeyID>.
Probable Cause Indicates that primary and secondary contents are not synchronized.
Recommended Synchronize the contents of the primary and secondary using instructions provided by the provider.
Action
Severity ERROR
412 Fabric OS Message Reference
53-1001767-01