Brocade Communications Systems 8 Reference page 253

Fabric os message reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

Recommended
In case of severe memory corruption, the system might recover by performing an automatic
Action
failover.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1007
Message
<timestamp>, [FABR-1007], <sequence-number>,, WARNING, <system-name>, IU free
error, caller: <function attempting to de-allocate IU>.
Probable Cause
Indicates that a failure occurred when deallocating an information unit. This message is rare and
usually indicates a problem with the Fabric OS.
Recommended
In case of severe memory corruption, the system might recover by performing an automatic
Action
failover.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1008
Message
<timestamp>, [FABR-1008], <sequence-number>,, WARNING, <system-name>, <error
description>.
Probable Cause
Indicates that errors occurred during the request domain ID state; the information unit (IU) cannot
be allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory.
Otherwise, this message is rare and usually indicates a problem with the Fabric OS. The error
descriptions are as follows:
Recommended
No action is required if the message appears with the FABR_1005 message.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FABR-1009
Message
<timestamp>, [FABR-1009], <sequence-number>,, WARNING, <system-name>, <error
description>.
Probable Cause
Indicates that errors were reported during the exchange fabric parameter state; cannot allocate
domain list due to a faulty exchange fabric parameter (EFP) type. This message is rare and usually
indicates a problem with the Fabric OS.
Fabric OS Message Reference
53-1001767-01
FAB RDI: cannot allocate IU
FAB RDI: cannot send IU
26
FABR-1007
177

Advertisement

Table of Contents
loading

Table of Contents