Brocade Communications Systems 8 Reference page 105

Severity INFO
AG-1015
Message
<timestamp>, [AG-1015], <sequence-number>,, WARNING, <system-name>, Unable to
find online N_Ports to connect to the fabric.
Probable Cause Indicates either no other N_Port is configured or all N_Ports are currently offline.
Recommended Check whether or not any other N_Port is configured.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportsave command and contact your switch service provider.
Severity WARNING
AG-1016
Message
<timestamp>, [AG-1016], <sequence-number>,, INFO, <system-name>, Failing over
F_Ports mapped to N_Port <port> to other N_Ports.
Probable Cause Indicates the specified N_Port has failed to come online. All F_Ports mapped to this N_Port are
being failed over to other active N_Ports.
Recommended Run the ag --mapShow command to display updated F_Port-to-N_Port mapping.
Action
Severity INFO
AG-1017
Message
<timestamp>, [AG-1017], <sequence-number>,, WARNING, <system-name>, No N_Ports
are currently Online.
Probable Cause Indicates no N_Ports are currently configured in the system or all configured N_Ports have failed to
come online.
Recommended Run the switchShow command to display the status of all ports in the system. Run the portCfgShow
Action command to display a list of ports currently configured as N_Ports.
Severity WARNING
AG-1018
Message
<timestamp>, [AG-1018], <sequence-number>,, ERROR, <system-name>, Host port
should not be connected to port <port>, which is configured as N_Port.
Probable Cause Indicates that an Initiator or Target is erroneously connected to a port configured for N_Port
operation.
Fabric OS Message Reference
53-1001767-01
2
AG-1015
29