SAS System Messages
SAS-1001
Message
<timestamp>, [SAS-1001], <sequence-number>,, ERROR, <system-name>, string
description of command which failed> of GE <GE port number which failed> failed.
Please retry the command. Data inst=<chip instance> st=<chip init state>
rsn=<failure reason> fn=<message function> oid=<chip OID>.
Probable Cause
The Hardware is not responding to the command request; possibly because it is busy.
Recommended
Retry the command.
Action
Severity
ERROR
Fabric OS Message Reference
53-1001767-01
Chapter
88
499