Bls System Messages - Brocade Communications Systems 8 Reference

BLS System Messages

BLS-1000
Message
<timestamp>, [BLS-1000], <sequence-number>,, ERROR, <system-name>, <command name>
of GE <port number> failed. Please retry the command. Data: inst=<ASIC instance>
st=<ASIC initializing state> rsn=<reason code> fn=<message function> oid=<ASIC
ID>.
Probable Cause Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended Retry the command.
Action
Severity ERROR
BLS-1001
Message
<timestamp>, [BLS-1001], <sequence-number>,, CRITICAL, <system-name>, FIPS <FIPS
Test Name> failed; algo=<algorithm code> type=<algorithm type> slot=<Slot
Number>.
Probable Cause Indicates that a FIPS failure has occurred and requires faulting the blade or switch.
Recommended Retry the command.
Action
Severity CRITICAL
BLS-1002
Message
<timestamp>, [BLS-1002], <sequence-number>,, INFO, <system-name>, An IPsec/IKE
policy was added.
Probable Cause Indicates that an IPsec or IKE policy was added and the configuration file was updated.
Recommended No action is required.
Action
Severity INFO
BLS-1003
Message
<timestamp>, [BLS-1003], <sequence-number>,, INFO, <system-name>, An IPsec/IKE
policy was deleted.
Fabric OS Message Reference
53-1001767-01
Chapter
9
75