Brocade Communications Systems 8 Reference page 621

SEC-1195
Message
<timestamp>, [SEC-1195], <sequence-number>,, WARNING, <system-name>, This switch
has no <component> license.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity WARNING
SEC-1196
Message
<timestamp>, [SEC-1196], <sequence-number>,, WARNING, <system-name>, Switch does
not have all default account names.
Probable Cause Indicates the default switch accounts admin and user do not exist on the switch when enabling
security.
Recommended Reset the default admin and user account names on the switch that reported the warning and retry
Action enabling security.
Severity WARNING
SEC-1197
Message
<timestamp>, [SEC-1197], <sequence-number>,, INFO, <system-name>, Changed account
<user name>.
Probable Cause Indicates the specified account has changed.
Recommended No action is required.
Action
Severity INFO
SEC-1198
Message
<timestamp>, [SEC-1198], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address
connection.
Probable Cause Indicates an API security violation was reported. The specified unauthorized host attempted to
establish an API connection.
Fabric OS Message Reference
53-1001767-01
SEC-1195
<IP address>
tries to establish API
90
545