Brocade Communications Systems 8 Reference page 128

4
AUTH-1046
AUTH-1046
Message
<timestamp>, [AUTH-1046], <sequence-number>,, INFO, <system-name>, <Operation
type> has been successfully completed.
Probable Cause Indicates that the certificate database operation has been updated using the secAuthCertificate
command. The values for Operation type can be "set" or "remove".
Recommended No action is required.
Action
Severity INFO
AUTH-1047
Message
<timestamp>, [AUTH-1047], <sequence-number>,, ERROR, <system-name>, <Operation
type> has failed.
Probable Cause Indicates that the specified action has failed to update the certificate database using the
secAuthCertificate command. The values for Operation type can be "set" or "remove".
Recommended Retry the secAuthCertificate command.
Action
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command
and contact your switch service provider.
Severity ERROR
52 Fabric OS Message Reference
53-1001767-01