Brocade Communications Systems 8 Reference page 444

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

<timestamp>,[HAMK-1004], <sequence-number>, SLOT cp-slot-number | CHASSIS, INFO,

<system-name>, Resetting standby CP (double reset may occur).

Probable Cause

Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This

message is typically seen when the standby CP has been rebooted. Note that in certain

circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover

automatically even if it has rebooted twice.

No action is required.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents