Brocade Communications Systems 8 Reference page 500

63
LFM-1004
LFM-1004
Message
<timestamp>, [LFM-1004], <sequence-number>,FFDC, CRITICAL, <system-name>, HA is
out of sync for opcode <HA OPCODE>, error value <error value>.
Probable Cause Indicates the trigger for some internal logging purpose.
Recommended Send the ffdc log to the support.
Action
Severity CRITICAL
LFM-1005
Message
<timestamp>, [LFM-1005], <sequence-number>,, WARNING, <system-name>, Logical port
<portnum> disabled with reason <portnum>(<reason>).
Probable Cause Indicates the trigger for logical port disable for internal logging purpose.
Recommended This could be due to a port segmentation. Check the reason for the port disable using the
Action switchshow command. Rectify the disable based on the reason.
Severity WARNING
LFM-1006
Message
<timestamp>, [LFM-1006], <sequence-number>,, WARNING, <system-name>, The switch
with domain <domain> with firmware version <version> has joined the FID <FID>
fabric and may not be compatible with XISL use.
Probable Cause Indicates that validation of firmware compatibility for XISL use on the specified switch has failed.
Recommended Check release notes to verify if this firmware is compatible with XISL use. If it is not switch should
Action be removed from the fabric.
Severity WARNING
424 Fabric OS Message Reference
53-1001767-01