Brocade Communications Systems 8 Reference page 380

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

Probable Cause

Indicates that the number of small form-factor pluggable (SFP) state changes has risen above the

high boundary. SFP state changes occur when the SFP is inserted or removed.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1140], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Probable Cause

Indicates that the number of small form-factor pluggable (SFP) state changes has changed from a

value outside of the acceptable range to a value within the acceptable range. SFP state changes

occur when the SFP is inserted or removed.

No action is required. Respond to this message as is appropriate to the particular policy of the

end-user installation.

<timestamp>, [FW-1160], <sequence-number>,, INFO, <system-name>, <Port Name>,

<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is

<Value> <Unit>.

Probable Cause

Indicates that the number of link failures that the port experiences has changed. Link loss errors

occur when a link experiences a loss of signal and fails. Both physical and hardware problems can

cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for

concurrent loss of synchronization errors and, if applicable, troubleshoot them.

Check both ends of your cable connection. Verify that the cable and small form-factor pluggables

(SFPs) are not faulty.

Losses of synchronization commonly causes link failures. If you receive concurrent loss of

synchronization errors, troubleshoot the loss of synchronization.

<timestamp>, [FW-1161], <sequence-number>,, INFO, <system-name>, <Port Name>,

<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents