Brocade Communications Systems 8 Reference page 430

42
FW-1529
Probable Cause Indicates that the number of state changes that the port experiences has changed and dropped
below upper boundary to a value within the acceptable range. The state of the port has changed for
one of the following reasons: the port has gone offline, has come online, is testing, is faulty, has
become an E_Port, has become an F_Port, has segmented, or has become a trunk port.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation.
Severity INFO
FW-1529
Message
<timestamp>, [FW-1529], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of link resets that the port experiences has changed and crossed lower
threshold boundary to a value within the acceptable range. Link resets occur due to link timeout
errors that indicate no frame activity at all. Both physical and hardware problems can cause link
resets to increase.
Recommended Respond to this message as is appropriate to the particular policy of the end-user installation.
Action
Severity INFO
FW-1530
Message
<timestamp>, [FW-1530], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has dropped below upper threshold boundary to in between(High=<High
value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of link resets that the port experiences has changed and dropped below
upper threshold boundary to a value within the acceptable range. Link resets occur due to link
timeout errors that indicate no frame activity at all. Both physical and hardware problems can
cause link resets to increase.
Recommended Respond to this message as is appropriate to the particular policy of the end-user installation.
Action
Severity INFO
FW-1531
Message
<timestamp>, [FW-1531], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, has crossed lower threshold boundary to in between(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of C3 transmit time out frames has crossed lower threshold boundary
and is in between low and high thresholds.
354 Fabric OS Message Reference
53-1001767-01