Brocade Communications Systems 8 Reference page 292

34
FCR-1005
Recommended Verify that the devices were intended to be taken offline. If not, verify that the devices are
Action functioning properly. Verify that all small form-factor pluggables (SFPs) are seated correctly. Check
for faulty cables, deteriorated SFPs, or dirty connections. Replace the cables and SFPs if necessary.
Severity INFO
FCR-1005
Message
<timestamp>, [FCR-1005], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone device removed at port <port number>.
Probable Cause Indicates that a device is removed from the logical storage area network (LSAN) zone in the edge
fabric.
Recommended No action is required.
Action
Severity INFO
FCR-1006
Message
<timestamp>, [FCR-1006], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone device added at port <port number>.
Probable Cause Indicates that a device is added to a logical storage area network (LSAN) zone in the edge fabric.
Recommended No action is required.
Action
Severity INFO
FCR-1007
Message
<timestamp>, [FCR-1007], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone deleted at port <port number>.
Probable Cause Indicates that a logical storage area network (LSAN) zone attached to the specified port was
deleted from the edge fabric.
Recommended No action is required.
Action
Severity INFO
FCR-1008
Message
<timestamp>, [FCR-1008], <sequence-number>,, INFO, <system-name>, FC router LSAN
zone created at port <port number>.
216 Fabric OS Message Reference
53-1001767-01