Brocade Communications Systems 8 Reference page 609

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

<timestamp>, [SEC-1138], <sequence-number>,, INFO, <system-name>, Security

database download received from Primary FCS.

Probable Cause

Indicates that a non-primary fabric configuration server (FCS) switch received a security database

Verify that the security event was planned. If the security event was planned, no action is required.

If the security event was not planned, take appropriate action as defined by your enterprise security

<timestamp>, [SEC-1139], <sequence-number>,, ERROR, <system-name>, The

RSNMP_POLICY cannot exist without the WSNMP_POLICY.

Probable Cause

Indicates that the receiving switch failed to validate the security database sent from the primary

fabric configuration server (FCS) switch. This message usually indicates that the data package is

corrupted, the time stamp on the package is out of range as a result of a replay attack or

out-of-sync time service, or the signature verification failed. Signature verification failure indicates

either an internal error (such as losing the primary public key) or an invalid database.

Run the secFabricShow command to verify that the fabric is still consistent. All the switches should

be in the ready state. If a switch is in the error state, the database might not be correctly updated

for that switch. This message might also be the result of an internal corruption or a hacker attack to

the secure fabric.

<timestamp>, [SEC-1142], <sequence-number>,, INFO, <system-name>, Reject new

policies. <reason text>.

Probable Cause

Indicates the new polices are rejected due to the reason specified.

Use proper syntax when entering policy information.

<timestamp>, [SEC-1145], <sequence-number>,, INFO, <system-name>, A security

admin event has occurred. This message is for information purpose only. The

message for individual event is:

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents