Brocade Communications Systems 8 Reference page 485

Recommended No action is required. You may change the configuration and retry the peering with the external
Action iSNS server.
Severity INFO
ISNS-1009
Message
<timestamp>, [ISNS-1009], <sequence-number>,, INFO, <system-name>, Peering with
external iSNS server <iSNS server IP address> not started because no virtual
targets found.
Probable Cause Indicates that no virtual targets were found, so peering was not started.
Recommended No action is required. Peering will resume automatically when virtual targets are detected.
Action
Severity INFO
ISNS-1010
Message
<timestamp>, [ISNS-1010], <sequence-number>,, WARNING, <system-name>, Slot/port
<Slot>/ge<Port> is out of range.
Probable Cause Indicates the slot or port is out of range.
Recommended Retry with a valid slot or port. Refer to the appropriate hardware reference manual for valid slot and
Action port ranges.
Severity WARNING
ISNS-1011
Message
<timestamp>, [ISNS-1011], <sequence-number>,, INFO, <system-name>, iSNS Client
Service is <iSNS client State (enabled/disabled)>.
Probable Cause Indicates the current state of the internet storage name services (iSNS) client is either enabled or
disabled.
Recommended No action is required. Use the fosConfig command to display, enable, or disable the iSNS client
Action service.
Severity INFO
ISNS-1013
Message
<timestamp>, [ISNS-1013], <sequence-number>,, WARNING, <system-name>, iSNS server
connection failure.
Fabric OS Message Reference
53-1001767-01
56
ISNS-1009
409