Brocade Communications Systems 8 Reference page 597

SEC-1085
Message
<timestamp>, [SEC-1085], <sequence-number>,, ERROR, <system-name>, Failed to
create <policy name>.
Probable Cause Indicates that the security policy was not created.
Recommended Check that the current policy configuration is valid. For example, the RSNMP policy cannot exist
Action without the WSNMP policy.
Severity ERROR
SEC-1086
Message
<timestamp>, [SEC-1086], <sequence-number>,, ERROR, <system-name>, The security
database is too large to fit in flash.
Probable Cause Indicates the security database has more data than the flash can accommodate.
Recommended Reduce the number of entries in some policies to decrease the security database size.
Action
Severity ERROR
SEC-1087
Message
<timestamp>, [SEC-1087], <sequence-number>,, ERROR, <system-name>, The security
database is larger than the data distribution limit of fabric <fabric data
distribution limit> bytes.
Probable Cause Indicates the security database has more data than can be distributed to some of the switches in
the fabric.
Recommended Reduce the number of entries in the security policies to decrease the security database size.
Action
Severity ERROR
SEC-1088
Message
<timestamp>, [SEC-1088], <sequence-number>,, ERROR, <system-name>, Cannot execute
the command. Please try later.
Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only
occur when the primary fabric configuration server (FCS) is distributing the security database to the
other switches in the fabric and local validation finds that there is an error in the security database.
This is a rare occurrence.
Fabric OS Message Reference
53-1001767-01
90
SEC-1085
521