Brocade Communications Systems 8 Reference page 742

111
ZONE-1037
ZONE-1037
Message
<timestamp>, [ZONE-1037], <sequence-number>,, ERROR, <system-name>, Unable to
examine <config file name>: error message <System Error Message>.
Probable Cause Indicates the Fabric OS cannot examine the zone configuration file. Typically the zone configuration
is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR
ZONE-1038
Message
<timestamp>, [ZONE-1038], <sequence-number>,, ERROR, <system-name>, Unable to
allocate memory for <config file name>: error message <System Error Message>.
Probable Cause Indicates the Fabric OS cannot allocate enough memory for the zone configuration file. Typically the
zone configuration is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR
ZONE-1039
Message
<timestamp>, [ZONE-1039], <sequence-number>,, ERROR, <system-name>, Unable to
read contents of <config file name>: error message <System Error Message>.
Probable Cause Indicates the Fabric OS cannot read the zone configuration file. Typically the zone configuration is
too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
Severity ERROR
ZONE-1040
Message
<timestamp>, [ZONE-1040], <sequence-number>,, INFO, <system-name>, Merged zone
database exceeds limit.
Probable Cause Indicates the Fabric OS cannot read the merged zone configuration file. Typically the zone
configuration is too large for the memory available on the switch.
Recommended Reduce the size of the zone database and retry the operation.
Action
666 Fabric OS Message Reference
53-1001767-01