Brocade Communications Systems 8 Reference page 201

Recommended If you want to preserve the user data, use cryptocfg --modLUNpolicy -cleartext to convert to clear
Action text LUN.
Use cryptocfg ---modLUNpolicy -disable_allowdecrypt to disable decryption of existing data. Then try
the LUN deletion again.
Severity ERROR
CVLC-1008
Message
<timestamp>, [CVLC-1008], <sequence-number>,, ERROR, <system-name>, LUN discovery
failure: <Discovery state>, Container: <Target container name>, Initiator:
<Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that LUN discovery failed.
Recommended No action is required.
Action
Severity ERROR
CVLC-1009
Message
<timestamp>, [CVLC-1009], <sequence-number>,, ERROR, <system-name>, Wrong device
type: should be <Expected device type (Disk/Tape)>, found <Discovered device type
(Disk/Tape)>.\nContainer: <Target container name>, Initiator: <Initiator physical
WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that LUN discovery failed.
Recommended No action is required.
Action
Severity ERROR
CVLC-1010
Message
<timestamp>, [CVLC-1010], <sequence-number>,, ERROR, <system-name>, Tape license
is required for tape container: <Target container name>.
Probable Cause Indicates that the tape container is configured with non-Brocade mode but there is no valid license.
Recommended Obtain license for non-Brocade mode.
Action
Severity ERROR
Fabric OS Message Reference
53-1001767-01
19
CVLC-1008
125