Brocade Communications Systems 8 Reference page 799

SEC-3039
Message
AUDIT, <timestamp>, [SEC-3039], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: Securty Violation, Status: failed, Info: Unauthorized
host with IP address <IP address of the violating host> tries to establish
connection using <Protocol Connection Type>.
Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.
Recommended Check for unauthorized access to the switch through the specified protocol connection. Take
Action appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-3044
Message
AUDIT, <timestamp>, [SEC-3044], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS mode has been changed to <Fips Mode>.
Probable Cause Indicates there was a change in the FIPS mode.
Recommended Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3045
Message
AUDIT, <timestamp>, [SEC-3045], INFO, SECURITY, <event-initiator-details>,
<event-location>, System has been zeroized.
Probable Cause Indicates the system has been zeroized.
Recommended Verify the security event was planned. If the security event was planned, no action is required. If the
Action security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3046
Message
AUDIT, <timestamp>, [SEC-3046], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS self tests mode has been set to <Self Test Mode>.
Probable Cause Indicates there was a change in the FIPS Self Test mode.
Fabric OS Message Reference
53-1001767-01
125
SEC-3039
723