Brocade Communications Systems 8 Reference page 130

5
ANV-1004
ANV-1004
Message
<timestamp>, [ANV-1004], <sequence-number>,, ERROR, <system-name>, <slot
number>,<chip index>: Invalid DMA ch pointer, chan:<Channel number>,
good_addr:0x<Good address> bad_addr:0x<Bad address>.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may
degrade data traffic.
Recommended Restart the system at the next maintenance window. If the problem persists, replace the blade.
Action
Severity ERROR
ANV-1005
Message
<timestamp>, [ANV-1005], <sequence-number>,, ERROR, <system-name>,<slot
number>,<chip index>,<anvil id>: Memory allocation failed.
Probable Cause Indicates the memory allocation failure in the software.
Recommended Restart the system at the next maintenance window. If the problem persists, replace the CP blade.
Action
Severity ERROR
ANV-1006
Message
<timestamp>, [ANV-1006], <sequence-number>,, CRITICAL, <system-name>, <slot
number>,<chip index>: HW ASIC Chip fault. Type = 0x<chip error type>, Error =
<chip error string>.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that renders
the chip as not operational.
Recommended Restart the system at the next maintenance window. If the problem persists, replace the blade.
Action
Severity CRITICAL
ANV-1007
Message
<timestamp>, [ANV-1007], <sequence-number>,, CRITICAL, <system-name>, <slot
number>,<chip index>: ANVIL PASS 1 low buff pool fault: <chip regval field>
0x<chip error type>.
Probable Cause Indicates that Anvil Pass 1 is out of free buffer which might cause a chip fault.
Recommended Reconfigure the testing setup.
Action
54 Fabric OS Message Reference
53-1001767-01