Brocade Communications Systems 8 Reference page 752

112
AG-1037
Probable Cause Indicates that one of the ports is connected to a Non-Brocade Fabric.
Recommended No action is required.
Action
Severity WARNING
AG-1037
Message
AUDIT, <timestamp>, [AG-1037], <sequence-number>,, INFO, <system-name>,Trunked
N_Port (<nport>) going offline, if switchshow CLI for the connected fabric switch
port displays Persistently disabled: Area has been acquired, then check cabling:
all trunked ports should be in same ASIC Port Group .
Probable Cause Indicates that the cabling is incorrect.
Recommended If the switchshow command on the connected fabric switch port displays 'Persistently disabled:
Action Area has been acquired', then check the cabling on the AG. All trunked ports in a single trunk
should belong to the same ASIC Port Group.
Severity INFO
676 Fabric OS Message Reference
53-1001767-01