Brocade Communications Systems 8 Reference page 539

Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1017
Message
<timestamp>, [PDM-1017], <sequence-number>, FFDC, CRITICAL, <system-name>, System
(<Error Code>): <Command>.
Probable Cause Indicates the specified system call failed.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity CRITICAL
PDM-1019
Message
<timestamp>, [PDM-1019], <sequence-number>,, WARNING, <system-name>, File path or
trigger too long.
Probable Cause Indicates one line of the pdm.conf file is too long.
Recommended Run the firmwareDownload command to reinstall the firmware.
Action
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity WARNING
PDM-1020
Message
<timestamp>, [PDM-1020], <sequence-number>,, WARNING, <system-name>, Long path
name (<Path>/<File Name>), Skip.
Probable Cause Indicates the specified file path name is too long. The maximum character limit is 49 characters.
Recommended Use path names not exceeding 49 characters in length for the files to be replicated.
Action
Severity WARNING
PDM-1021
Message
<timestamp>, [PDM-1021], <sequence-number>,, WARNING, <system-name>, Failed to
download area port map.
Fabric OS Message Reference
53-1001767-01
75
PDM-1017
463