Brocade Communications Systems 8 Reference page 403

Fabric os message reference

Hide thumbs Also See for 8:

Table of Contents

<timestamp>, [FW-1337], <sequence-number>,, INFO, <system-name>, <Label>, is

below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the number of device cable connection (DCC) violations has fallen below the low

boundary. DCC violations indicate that an unauthorized device tried to join the fabric. The

DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor

(HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric

connected to the authorized port. Enforcement for private loop devices not performing FLOGI is

done through the name server.

No action is required.

<timestamp>, [FW-1338], <sequence-number>,, WARNING, <system-name>, <Label>, is

above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>

Probable Cause

Indicates that the number of device cable connection (DCC) violations has risen above the high

boundary. DCC violations indicate that an unauthorized device tried to join the fabric. The

DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor

(HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric

connected to the authorized port. Enforcement for private loop devices not performing FLOGI is

done through the name server.

Run the errShow command to determine the device WWN, switch WWN, and switch port.

Responses to security-class messages depend on user policies. Consult your security administrator

for response strategies and policies.

<timestamp>, [FW-1339], <sequence-number>,, INFO, <system-name>, <Label>, is

between high and low boundaries(High=<High value>, Low=<Low value>). Current value

is <Value> <Unit>.

Fabric OS Message Reference

53-1001767-01

Chapters

Table of Contents