Ucst System Messages - Brocade Communications Systems 8 Reference

UCST System Messages

UCST-1003
Message
<timestamp>, [UCST-1003], <sequence-number>,, INFO, <system-name>, Duplicate Path
to Domain <domain ID>, Output Port = <port number>, PDB pointer = 0x<value>
Probable Cause Indicates the duplicate paths were reported to the specified domain from the specified output port.
The path database (PDB) pointer is the address of the path database and provides debugging
information.
Recommended No action is required.
Action
Severity INFO
UCST-1007
Message
<timestamp>, [UCST-1007], <sequence-number>, FFDC, CRITICAL, <system-name>,
Inconsistent route detected: Port = <port number>, should be <port number>
Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing
protocol and the hardware configuration. The first port number displayed is what the hardware has
configured and the second port number displayed is what the protocol is using.
Recommended Run the switchDisable command and then the switchEnable command to reset the routing
Action database. Run the uRouteShow command to display the new routing tables.
Severity CRITICAL
UCST-1020
Message
<timestamp>, [UCST-1020], <sequence-number>,, WARNING, <system-name>, Static
route (input-area: <port number>, domain: <domain ID> output-area: <port number>)
has been ignored due to platform limitation.
Probable Cause Indicates the configured static route cannot be applied to the routing database due to a platform
limitation.
Recommended No action is required.
Action
Severity WARNING
Fabric OS Message Reference
53-1001767-01
Chapter
105
643