Pswp System Messages - Brocade Communications Systems 8 Reference

PSWP System Messages

PSWP-1001
Message
<timestamp>, [PSWP-1001], <sequence-number>,, INFO, <system-name>, PID for port
<wwn name corresponding to source port> and port <wwn name corresponding to
destination port> are swapped. New PID for port <wwn name corresponding to source
port> is <wwn name corresponding to destination port> and port <new area
corresponding to source wwn> is <new area corresponding to destination wwn>.
Probable Cause Indicates that the portSwap command has been issued.
Recommended No action is required.
Action
Severity INFO
PSWP-1002
Message
<timestamp>, [PSWP-1002], <sequence-number>,, INFO, <system-name>, Port Swap
feature enabled.
Probable Cause Indicates that the portSwap feature has been enabled in the switch.
Recommended No action is required.
Action
Severity INFO
PSWP-1003
Message
<timestamp>, [PSWP-1003], <sequence-number>,, INFO, <system-name>, Port Swap
feature disabled.
Probable Cause Indicates that the portSwap command feature has been disabled in the switch.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1001767-01
Chapter
81
481