Log System Messages - Brocade Communications Systems 8 Reference

LOG System Messages

LOG-1000
Message
<timestamp>, [LOG-1000], <sequence-number>,, INFO, <system-name>, Previous
message repeated
Probable Cause Indicates the previous message repeated the specified number of times.
Recommended No action is required.
Action
Severity INFO
LOG-1001
Message
<timestamp>, [LOG-1001], <sequence-number>, FFDC, WARNING, <system-name>, A log
message was dropped
Probable Cause Indicates a log message was dropped. A trace dump file is created.
Recommended Run the reboot command for nonbladed switches or the haFailover command on bladed switches.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
LOG-1002
Message
<timestamp>, [LOG-1002], <sequence-number>, FFDC, WARNING, <system-name>, A log
message was dropped
Probable Cause Indicates a message was not recorded by the error logging system. A trace dump file is created. The
message might still be visible through SNMP or other management tools.
Recommended Run the reboot command for nonbladed switches or the haFailover command on bladed switches.
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
Fabric OS Message Reference
53-1001767-01
<repeat count>
times
Chapter
64
425