Hlo System Messages - Brocade Communications Systems 8 Reference

HLO System Messages

HLO-1001
Message
<timestamp>, [HLO-1001], <sequence-number>, FFDC, ERROR, <system-name>,
Incompatible Inactivity timeout <dead timeout> from port <port number>, correct
value <value>.
Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol.
The Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO dead timeout value is not configurable, so this error can only occur when
the Brocade switch is connected to a switch from another manufacturer.
Recommended The dead timeout value of the remote switch must be compatible with the value specified in the
Action FSPF protocol. Refer to the documentation for the other manufacturer's switch to change this
value.
Severity ERROR
HLO-1002
Message
<timestamp>, [HLO-1002], <sequence-number>, FFDC, ERROR, <system-name>,
Incompatible Hello timeout <HLO timeout> from port <port number>, correct value
<correct value>.
Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol.
The Brocade switch will not accept FSPF frames from the remote switch.
In the Fabric OS, the HLO timeout value is not configurable, so this error can only occur when the
Brocade switch is connected to a switch from another manufacturer.
Recommended The HLO timeout value of the remote switch must be compatible with the value specified in the
Action FSPF protocol. Refer to the documentation for the other manufacturer's switch to change this
value.
Severity ERROR
HLO-1003
Message
<timestamp>, [HLO-1003], <sequence-number>, FFDC, ERROR, <system-name>, Invalid
Hello received from port <port number>, Domain = <domain ID>, Remote Port =<remote
port ID>.
Probable Cause Indicates that the HLO message received was invalid and the frame was dropped. The Brocade
switch will not accept FSPF frames from the remote switch.
Fabric OS Message Reference
53-1001767-01
Chapter
46
383