Brocade Communications Systems 8 Reference page 120

Fabric os message reference
Hide thumbs Also See for 8:
Table of Contents

Advertisement

4
AUTH-1022
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
INFO
AUTH-1022
Message
<timestamp>, [AUTH-1022], <sequence-number>,, ERROR, <system-name>, Failed to
extract <data type> from <message> payload: port <port number>.
Probable Cause
Indicates that the authentication process failed to extract a particular value from the receiving
payload.
Recommended
Usually this problem is transient. The authentication might fail.
Action
Reinitialize authentication using the portDisable and portEnable commands or the switchDisable
and switchEnable commands.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
Severity
ERROR
AUTH-1023
Message
<timestamp>, [AUTH-1023], <sequence-number>,, ERROR, <system-name>, Failed to
<operation type> during <authentication phase>: port <port number>.
Probable Cause
Indicates an authentication operation failed for a certain authentication phase.
Operation type varies depending on authentication type:
The authentication phase specifies which phase of a particular authentication protocol failed.
A nonce is a single-use, usually random value used in authentication protocols to prevent replay
attacks.
Recommended
The error might indicate that an invalid entity tried to connect to the switch. Check the connection
Action
port for possible unauthorized access attack.
It might indicate that the public key infrastructure (PKI) object for SLAP or FCAP or secret value for
DH-CHAP on the local entity is not set up properly. Reinstall all PKI objects or reset the secret value
for DH-CHAP properly.
If the message persists, run the supportFtp command (as needed) to set up automatic FTP
transfers; then run the supportSave command and contact your switch service provider.
44
Some operations for switch link authentication protocol (SLAP): certificate retrieve, certificate
verification, signature verification, or nonce signing.
Some operations for fibre channel authentication protocol (FCAP): certificate retrieve,
certificate verification, signature verification, or nonce singing.
Some operations for Diffie Hellman - challenge handshake authentication Protocol (DH-CHAP).
response calculation, challenge generation, or secret retrieve.
Fabric OS Message Reference
53-1001767-01

Advertisement

Table of Contents
loading

Table of Contents