Brocade Communications Systems 8 Reference page 582

90
SEC-1016
Recommended Resolve the above specifed error by executing the command only from Primary FCS.
Action
Severity ERROR
SEC-1016
Message
<timestamp>, [SEC-1016], <sequence-number>,, INFO, <system-name>, Security
violation: Unauthorized host with IP address
tries to establish SSH connection.
Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in
the message.
Recommended Check for unauthorized access to the switch through the SSH connection.
Action
Severity INFO
SEC-1022
Message
<timestamp>, [SEC-1022], <sequence-number>,, WARNING, <system-name>, Failed to
<operation>
Probable Cause Indicates the fabric has failed to generate or validate either the public or private key pair or the
certificate signing request (CSR).
Recommended Run the pkiShow command and verify that all public key infrastructure (PKI) objects exist on the
Action switch. If the private key does not exist, follow the steps for re-creating PKI objects, outlined in the
Secure Fabric OS Administrator's Guide. If a certificate does not exist or is invalid, install the
certificate by following the field upgrade process.
Severity WARNING
SEC-1024
Message
<timestamp>, [SEC-1024], <sequence-number>,, INFO, <system-name>, The
security database is too large to fit in flash.
Probable Cause Indicates the size of the security database is too large for the flash memory. The size of the security
database increases with the number of entries in each policy.
Recommended Reduce the size of the security database by reducing the number of entries within each policy.
Action
Severity INFO
506
PKI objects.
<IP address of the violating host>
Fabric OS Message Reference
<DB name>
53-1001767-01