Disabling The Ip Permit List; Clearing An Ip Permit List Entry - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Configuring the IP Permit List
Console> (enable) show ip permit
Telnet permit list feature enabled.
Snmp permit list feature disabled.
Permit List
----------------
172.16.0.0
172.20.52.3
172.20.52.32
Denied IP Address
-----------------
172.100.101.104
172.187.206.222
Console> (enable) show snmp
RMON:
Extended Rmon:
Traps Enabled:
ippermit
Port Traps Enabled: None
Community-Access
----------------
read-only
read-write
read-write-all
Trap-Rec-Address
----------------------------------------
Console> (enable)

Disabling the IP Permit List

To disable the IP permit list on the switch, perform this task in privileged mode:
Task
Step 1
Disable the IP permit list on the switch.
Step 2
Verify the IP permit list configuration.
This example shows how to disable the IP permit list:
Console> (enable) set ip permit disable
IP permit list disabled.
Console> (enable)

Clearing an IP Permit List Entry

An IP address can be cleared from the SNMP permit list, the Telnet permit list, or both lists. If you do
not specify which permit list to clear the IP address from, the IP address is deleted from both permit lists.
Disable the IP permit list before you clear IP permit entries or host addresses to prevent your
Caution
connection from being dropped by the switch you are configuring in case you clear your current IP
address.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
34-4
Mask
Access-Type
---------------
---------------
255.255.0.0
telnet
snmp telnet
255.255.255.224
snmp
Last Accessed Time Type
------------------ ------
01/20/97,07:45:20
SNMP
01/21/97,14:23:05
Telnet
Disabled
Extended RMON module is not present
Community-String
--------------------
public
private
secret
Chapter 34
Telnet Count
SNMP Count
------------
----------
14
7
Trap-Rec-Community
--------------------
Command
set ip permit disable [telnet | snmp | ssh]
show ip permit
Configuring the IP Permit List
1430
236
78-13315-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents