Deleting Policing Rules - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Catalyst 6000 series software configuration guide
Hide thumbs Also See for WS-X6066-SLB-APC - Content Switching Module:
Table of Contents

Advertisement

Configuring QoS
Console> (enable) show qos policer config aggregate test2
QoS aggregate policers:
Aggregate name
----------------------------- ------------------
test2
Console> (enable)
For PFC2, this example shows how to create an aggregate excess rate policing rule with a 64-Kbps rate
limit and a 128-Kb burst limit that will cause traffic that exceeds the normal rate of 64 Kbps and a burst
size of 96 Kb to be marked down as specified in the normal markdown DSCP map, and traffic that
exceeds 128 Kbps and a burst size of 96 Kb to be dropped:
Console> (enable) set qos policer aggregate test3 rate 64 policed-dscp erate 128 drop
burst 96
QoS policer for aggregate test3 created successfully.
Console> (enable) show qos policer config aggregate test3
QoS aggregate policers:
Aggregate name
----------------------------- ------------------
test3
Console> (enable)

Deleting Policing Rules

You can only delete policing rules if they are not attached to any interfaces (for more information,
Note
see the
To delete one or all policing rules, perform this task in privileged mode:
Task
Step 1
Delete one or all policing rules.
Step 2
Verify the configuration.
This example shows how to delete the microflow policing rule named my_micro:
Console> (enable) clear qos policer microflow my_micro
my_micro QoS microflow policer cleared.
Console> (enable)
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
41-36
"Detaching ACLs from Interfaces" section on page
Normal rate (kbps)
Burst size (kb) Normal action
--------------- -------------
64
Excess rate (kbps)
Burst size (kb) Excess action
------------------
--------------
8000000
ACL attached
------------------------------------
Normal rate (kbps)
Burst size (kb) Normal action
--------------- -------------
64
Excess rate (kbps)
Burst size (kb) Excess action
------------------
--------------- ---------------
128
ACL attached
------------------------------------
41-46).
Command
clear qos policer {microflow | aggregate}
{policer_name | all}
show qos policer {config | runtime}
{microflow | aggregate | all}
Chapter 41
Configuring QoS
100
policed-dscp
---------------
100
policed-dscp
96 policed-dscp
96 drop
78-13315-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents