Disabling The Ip Permit List - Cisco WS-C6506 Software Manual

Configuring the IP Permit List on the Switch
This example shows how to enable the IP permit list and verify the configuration:
Console> (enable) set ip permit enable
IP permit list enabled.
Console> (enable) set snmp trap enable ippermit
SNMP IP Permit traps enabled.
Console> (enable) set logging level ip 4 default
System logging facility <ip> set to severity 4(warnings)
Console> (enable) show ip permit
Telnet permit list feature enabled.
Snmp permit list feature disabled.
Permit List
----------------
172.16.0.0
172.20.52.3
172.20.52.32
Denied IP Address
-----------------
172.100.101.104
172.187.206.222
Console> (enable) show snmp
RMON:
Extended Rmon:
Traps Enabled:
ippermit
Port Traps Enabled: None
Community-Access
----------------
read-only
read-write
read-write-all
Trap-Rec-Address
----------------------------------------
Console> (enable)

Disabling the IP Permit List

To disable the IP permit list on the switch, perform this task in privileged mode:
Task
Step 1 Disable the IP permit list on the switch.
Step 2 Verify the IP permit list configuration.
This example shows how to disable the IP permit list:
Console> (enable) set ip permit disable
IP permit list disabled.
Console> (enable)
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
37-4
Mask Access-Type
--------------- ---------------
255.255.0.0 telnet
snmp telnet
255.255.255.224 snmp
Last Accessed Time Type
------------------ ------
01/20/97,07:45:20 SNMP
01/21/97,14:23:05 Telnet
Disabled
Extended RMON module is not present
Community-String
--------------------
public
private
secret
Chapter 37
Telnet Count SNMP Count
------------ ----------
14
7
Trap-Rec-Community
--------------------
Command
set ip permit disable [telnet | snmp | ssh]
show ip permit
Configuring the IP Permit List
1430
236
OL-8978-04