Disabling Vtp Pruning; Displaying Vtp - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Configuring VTP
Console> (enable) show vtp domain
Domain Name
-------------------------------- ------------ ----------- ----------- ----------
Lab_Network
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
8
Last Updater
--------------- -------- -------- -------------------------
172.20.52.2
Console> (enable) show trunk
Port
--------
1/1
Port
--------
1/1
Port
--------
1/1
Port
--------
1/1
Console> (enable)

Disabling VTP Pruning

To disable VTP pruning, perform this task in privileged mode:
Task
Step 1
Disable VTP pruning in the management domain. set vtp pruning disable
Step 2 Verify that VTP pruning is disabled.
This example shows how to disable VTP pruning in the management domain:
Console> (enable) set vtp pruning disable
This command will disable the pruning function in the entire management domain.
Do you want to continue (y/n) [n]? y
VTP domain Lab_Network modified
Console> (enable)

Displaying VTP

To display VTP activity, including VTP advertisements sent and received and VTP errors, perform this
task:
Task
Display VTP statistics for the switch.
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
10-10
1023 16
V2 Mode Pruning
disabled enabled
Mode Encapsulation
----------- -------------
auto isl
Vlans allowed on trunk
---------------------------------------------------------------------
1-1005
Vlans allowed and active in management domain
---------------------------------------------------------------------
1,522-524
Vlans in spanning tree forwarding state and not pruned
---------------------------------------------------------------------
1,522-524
Domain Index VTP Version Local Mode
1 2
disabled
PruneEligible on Vlans
2-99,250-255,501-1000
Status Native vlan
------------ -----------
trunking 523
Command
show vtp domain
Command
show vtp statistics
Chapter 10 Configuring VTP
Password
server -
78-13315-02