Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual page 771

Chapter 41 Configuring QoS
This example shows how to delete PDP server configuration:
Console> (enable) clear cops server all
All COPS diff-serv servers cleared.
All COPS rsvp servers cleared.
Console> (enable)
Configuring the COPS Domain Name
PDP servers use a COPS domain name to communicate with policy enforcement point (PEP) devices
such as switches. To configure a COPS domain name for the switch, perform this task in privileged
mode:
Task
Step 1 Configure the COPS domain name.
Step 2
Verify the COPS domain name.
This example shows how to configure a COPS domain name:
Console> (enable) set cops domain-name my_domain
Domain name set to my_domain.
Console> (enable)
Deleting the COPS Domain Name
To delete the COPS domain name, perform this task in privileged mode:
Task
Step 1 Delete the COPS domain name.
Step 2
Verify the configuration.
This example shows how to delete the COPS domain name:
Console> (enable) clear cops domain-name
Domain name cleared.
Console> (enable)
Configuring the COPS Communications Parameters
To configure the parameters COPS uses to communicate with the PDP server, perform this task in
privileged mode:
Task
Step 1 Configure the parameters COPS uses to
communicate with the PDP server.
Step 2 Verify the configuration.
78-13315-02
Command
set cops domain-name domain_name
show cops info
Command
clear cops domain-name
show cops info
Command
set cops retry-interval initial increment
maximum
show cops info
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
Configuring QoS
41-65