Dynamic Port Vlan Membership Configuration Example - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Dynamic Port VLAN Membership with VMPS Configuration Examples
!Port Groups
!
!vmps-port-group <group-name>
! device <device-id> { port <port-name> | all-ports }
!
vmps-port-group WiringCloset1
device 198.92.30.32 port 3/2
device 172.20.26.141 port 2/8
vmps-port-group "Executive Row"
device 198.4.254.222 port 1/2
device 198.4.254.222 port 1/3
device 198.4.254.223 all-ports
!
!
!VLAN groups
!
!vmps-vlan-group <group-name>
! vlan-name <vlan-name>
!
vmps-vlan-group Engineering
vlan-name hardware
vlan-name software
!
!
!VLAN port Policies
!
!vmps-port-policies {vlan-name <vlan_name> | vlan-group <group-name> }
! { port-group <group-name> | device <device-id> port <port-name> }
!
vmps-port-policies vlan-group Engineering
port-group WiringCloset1
vmps-port-policies vlan-name Green
device 198.92.30.32 port 4/8
vmps-port-policies vlan-name Purple
device 198.4.254.22 port 1/2
port-group "Executive Row"

Dynamic Port VLAN Membership Configuration Example

Figure 18-1
In this example, these assumptions apply:
•
•
•
•
•
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
18-10
shows a network with a VMPS server switch and VMPS client switches with dynamic ports.
The VMPS server and the VMPS client are separate switches.
Switch 1 is the primary VMPS server.
Switch 3 and Switch 10 are secondary VMPS servers.
End stations are connected to these clients:
– Switch 2
– Switch 9
The database configuration file is called Bldg-G.db and is stored on a TFTP server with IP address
172.20.22.7.
Chapter 18 Configuring Dynamic Port VLAN Membership with VMPS
78-13315-02