Chapter 19 Checking Port Status And Connectivity; Checking Module Status - Cisco WS-X6066-SLB-APC - Content Switching Module Software Manual

Checking Port Status and Connectivity
This chapter describes how to check switch port status and connectivity on the Catalyst 6000 family
switches.
For complete syntax and usage information for the commands used in this chapter, refer to the
Note
Catalyst 6000 Family Command Reference publication.
This chapter consists of these sections:
•
•
•
•
•
•
•
•
•

Checking Module Status

Catalyst 6000 family switches are multimodule systems. You can see what modules are installed, as well
as the MAC address ranges and version numbers for each module, using the show module [mod]
command. Specify a particular module number to see detailed information on that module.
This example shows how to check module status. The output shows that there is one supervisor engine
and four additional modules installed in the chassis.
78-13315-02
Checking Module Status, page 19-1
Checking Port Status, page 19-2
Checking Port Capabilities, page 19-4
Using Telnet, page 19-4
Using Secure Shell Encryption for Telnet Sessions, page 19-5
Monitoring User Sessions, page 19-6
Using Ping, page 19-7
Using Layer 2 Traceroute, page 19-9
Using IP Traceroute, page 19-10
Catalyst 6000 Family Software Configuration Guide—Releases 6.3 and 6.4
C H A P T E R
19
19-1